辽宁35选7开奖结果 www.qxicej.com.cn 進口呼吸空氣充填泵優點
" LSCOMP " LSCOMPRESSOR, LSPE200-TE-H MOD., reciprocating, stationary, in "W" frame arrangement, balanced, single-acting, THREE STAGE compressor for Air up to330 bar., Large capacity, slow running, air - cooled, WITH CYLINDERS LUBRICATION, stationary unit, fully equipped. Ideal for Industrial applications.
The compressor is a trunk piston style compressor. It is derived from a proven oil field compressor frame that has been modified for the demands of high-pressure compression. The frame is then equipped with air-cooled cylinders, permitting higher compression ratios and better efficiency. The compressor is balanced so that, in most cases, the compressor can be run on a high-density rubber pad, and does not require a special foundation.
Critical shutdowns include a high discharge gas temperature switch, low oil pressure switch, and a high discharge gas pressure switch (final stage).
Additional equipment include an air cooled heat exchanger after each stage of compression (water cooled heat exchangers available as an option), pressure safety valves after each stage of compression, all internal skid piping, personnel guards over rotating components, a separator after each stage of compression, and an automatic condensate drain system.
Dependable Performance: suited for continuous operation, due to their rugged design and corrosion resistant intermediate filter and cooler assemblies.
尖端的設計: 驅動部分的運動部件和連桿均經過**平衡, 因此機組的震動極小, 連桿的負荷平衡. 級間冷卻器, 翅片式后冷卻器, 翅片式氣缸,翅片式鋁制缸頭, 帶有風扇的飛輪,均保證極低的運行和排氣溫度.
State-of-the-Art Design: balanced moving parts in the drive gear and connecting rods allows for low vibration and balanced rod loads. Interstage coolers, finned after cooler, finned cylinders, finned aluminum heads, and fan-bladed flywheel produce cooler operating and discLSErge temperatures.
上等的材質: 鑄鐵的氣缸確保長壽命, 采用具有延展性鐵制材料制成的平衡曲軸,帶有大直徑平衡塊確保低軸承負荷,高強度并增加了機組壽命.鋁制缸頭提供超強的散熱.7075-T6鋁合金連桿提供高強度. 鋁制曲軸箱消除了不必要的重量.
Top Graded Materials: cast iron cylinders for long life; ductile iron counterbalanced cranksLSEft with large diameter throw for low bearing loads, high strength and increased life; aluminum cylinder heads for superior heat dissipation; 7075-T6 aluminum connecting rods for high strength; and aluminum crankcase for elimination unnecessary weight.
高質量部件:低摩擦軸承提供平滑的運行并降低功耗. 前后軸承提供**的曲軸對中,延長曲軸壽命. 全封閉風扇防護罩. 飛輪經過**平衡并帶有風扇葉片,提供極好的冷卻能力. 重載型曲軸驅動齒輪式油泵為磨損區域提供充足的潤滑.不銹鋼閥片耐磨損, 散熱性好. 閥座采用鍍鎳處理,耐腐蝕.
High Quality Components: anti-friction bearings for smooth operation with lower horsepower; front and rear bearings for precise cranksLSEft alignment and long sLSEft life; fully enclosed, all metal fan-blade guard; fly wheel precision-balanced and fan-bladed for excellent cooling capacity; heavy duty, sLSEft-driven, gear-type oil pump for generous lubrication to critical wear areas for longer pump life; stainless steel, disc-in-plate valves for long wear and excellent heat resistance and dissipation; valve housings nickel-plated for corrosion resistance.
機組供貨范圍 Scope of supply
Three-CYLINDER COMPRESSOR, air cooled, single effect, three-stage compression.
Intake removable filter, with silencer.
Normal inertia flywheel, for V belts transmission.
V belt and belt enclosure
flash lubritation system
Light alloy pistons
Aluminium cylinder heads, with individual valve pockets.
Automatic valves, big flow area, operating much below their nominal cLSracteristics.
AIR-COOLED stainless steel intercoolers between stages
AIR-COOLED stainless steel aftercooler, furnished with safety valve.
air/coolant separators after the second stage cooler and after cooler
3KW 380V/3/50, IP54電機
3KW, 380V/3/50 IP54 motor
Steel cabinet enclosure